AC repair
Heat pumps
Ductless mini splits
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable Furnace Repair Across North Palm Beach
Furnace repair in North Palm Beach typically runs between $150 and $700 depending on what’s failed, and most calls are handled same day. If you’re east of US-1, salt air is quietly attacking your outdoor condenser and electrical connections year-round, even when the furnace itself seems fine. Our Furnace Repair team works throughout the Village of North Palm Beach, from the waterfront streets around Lakeside Park to the newer sections west of Prosperity Farms Road. Call (728) 220-0996 and a live person answers, any hour.
Why Brandt HVAC Co West Palm Beach Is North Palm Beach’s Preferred Furnace Repair Company
North Palm Beach homeowners deal with a specific set of problems you won’t find 20 miles inland. Salt-laden air off the Intracoastal Waterway gets into outdoor electrical cabinets, corrodes contactors, and pits condenser coils. We see it on nearly every call east of US-1. Devin Marlowe has built our repair process around showing up armed for exactly that: corrosion-resistant parts, dielectric grease on every outdoor connection we touch, and a written price before any work starts.
You’ll know who’s coming before the van pulls up. Every technician is background-checked and identity-verified under the Threshold Verified standard. We send their name and photo before the visit, and they show a photo ID badge at the door. That matters a lot to homeowners who are alone during the day, or parents with kids at home. No anonymous van. No stranger at the door. Just the person we told you to expect.
Response time to North Palm Beach runs under two hours on most weekdays. We coordinate dispatch from our South Florida metro office, and our crews work North Palm Beach neighborhoods including the Village, North Palm Beach Heights, and the condos along US-1 daily. Every repair carries a written guarantee with the 365-Day Done Right Promise behind it. If the repair fails inside the guarantee window, we return free. No argument, no second invoice.
Styles & brands we work with
Heating Repair in North Palm Beach
Heating Repair in North Palm Beach usually means one of two things: a gas furnace that won’t light or a heat pump that’s lost its heating circuit. Mild winters don’t mean the system gets a break. Salt corrosion on outdoor electrical connections causes intermittent shutdowns when the defrost board loses signal, especially after strong onshore winds drive spray across A1A and up through the side streets. A typical heating repair here runs $150 to $700. The lower end covers contactors and capacitors. The upper end usually means a blower motor or control board replacement.
What a Coastal Heating Repair Call Looks Like
We check the outdoor condenser first, even on a heating call. In North Palm Beach, a corroded contactor on the condenser can chatter, spike voltage, and take out the blower motor relay inside the air handler. It presents as a furnace that shuts down randomly, but the root cause is outside. We open the cabinet, inspect the contactor and capacitor, clean what’s salvageable, and replace what isn’t.
Salt Air and Electrical Connections
Outdoor electrical connections on homes within half a mile of the Intracoastal need inspection at least once a year. The connectors develop green crust and resistance climbs until the board reads a fault. We treat every outdoor connection we touch with corrosion inhibitor, and we’ll show you what we found before we leave.
Boiler Repair in North Palm Beach
Boiler Repair in North Palm Beach is less common than furnace work, but the older waterfront homes have them. A 1960s or 1970s ranch along the C-17 Canal might still run a hydronic loop with a gas-fired boiler. These systems fail differently than forced-air furnaces. The circulator pump seizes, the expansion tank waterlogs, or the gas valve needs calibration. Repair costs run the same $150 to $700 range, with pump replacements typically landing near the middle of that band.
Boiler-Specific Corrosion Issues
Boilers don’t have outdoor condensers, so the salt air hits them less directly. But the flue piping and draft hood on outdoor-vented units corrode faster near the water. We check the flue for rust-through on every boiler call. A compromised flue is a carbon monoxide risk, so we treat it as urgent.
Radiant Heat in Older North Palm Beach Homes
Some post-war homes in North Palm Beach Heights still use in-slab radiant heat. When the loop loses pressure or the zone valve sticks, rooms heat unevenly. We trace the zone wiring, repressurize the loop, and verify the boiler’s high-limit switch is functioning before we call the job done.
Trusted Brands We Service in North Palm Beach
We service and repair Rheem, York, Daikin, and Bryant equipment, along with every major residential brand. Parts availability is a real advantage for North Palm Beach customers: our local parts stocking covers common Rheem and York control boards, ignitors for Bryant furnaces, and Daikin inverter components. That means fewer second visits and less time waiting on a delivery. If your furnace is an older Rheem from the 1990s or a newer Bryant installed during infill construction, we know how it fails and what it takes to get it running again.
Common Furnace Repair Problems We See in North Palm Beach Homes
- Corroded contactors on outdoor condensers. On homes east of US-1, the contactor pits and corrodes within five years. It’s the single most common reason a furnace or heat pump stops responding, even in mild weather.
- Pitted condenser fins reducing heat exchange. Salt spray etches the aluminum fins until airflow drops. The system runs longer to hit setpoint, which overheats the heat exchanger and trips the high-limit switch.
- Blower motor relay failures from voltage spikes. A chattering contactor sends voltage spikes back through the low-voltage wiring. Eventually the blower motor relay inside the air handler burns out and the furnace won’t circulate warm air.
- Draft inducer and pressure switch faults on older gas furnaces. Humidity and salt contribute to rust on the inducer housing. Once rust flakes clog the pressure switch port, the furnace locks out. We see it most often on 1980s and 1990s homes near the canal.
See the difference
Before
After
Before
After
Before
AfterPricing for Furnace Repair in North Palm Beach, FL
Here’s what you can expect to pay in this market, parts and labor included:
| Repair Type | Typical Cost Range |
|---|---|
| Furnace Repair | $150 – $700 |
| Heating Repair | $150 – $700 |
| Boiler Repair | $150 – $700 |
The final number depends on what’s failed. An ignitor replacement runs $150 to $300. A corroded contactor is usually $180 to $320 with the part and corrosion treatment included. A blower motor or control board replacement can reach $600 to $700. You’ll see a written price before any work begins, on every single job, with no exceptions. Estimates are free. Call (728) 220-0996 and we’ll schedule a visit that fits your day.
We Also Serve Cities Near North Palm Beach
Our Furnace Repair in North Palm Beach service area extends to Palm Beach Gardens, Palm Beach, West Palm Beach, and Jupiter. If you’re just north of Northlake Boulevard or across the bridge in West Palm, call the same number and we’ll route the nearest available technician to you.
Serving North Palm Beach, FL - Our Local Coverage Area
We’re based in the North Palm Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in North Palm Beach
Twice a year at minimum, and one of those checks should happen before any forecasted cold snap. East of US-1, salt-laden air from the Intracoastal and Atlantic pits condenser coils and corrodes contactors within five years, often before the furnace itself fails. A pre-season inspection that includes coil cleaning and electrical connection treatment is the cheapest way to avoid a no-heat call in January. Call (728) 220-0996 to schedule a corrosion-focused tune-up.
Strong onshore winds drive salt spray inland, and that spray settles on outdoor electrical connections. If the contactor or defrost board terminals were already borderline, the added moisture and salt create enough resistance to interrupt the low-voltage signal. The furnace shuts down as a safety response. The fix usually involves cleaning or replacing the corroded connection and sealing it against future exposure. We’ll tell you exactly what failed before we quote the repair.
Yes. A pitted, corroded condenser coil reduces heat exchange, which forces the furnace or heat pump to run longer. That overheats the heat exchanger and can trip the high-limit switch, which is what brings us to your door. If the coil is severely pitted, repair cost stays in the normal $150 to $700 range but the coil replacement becomes a separate conversation. We’ll show you the coil condition and give you a written price for whatever you decide.
If you’re within half a mile of the Intracoastal or the ocean, it’s worth serious consideration. Standard condenser coils on homes east of US-1 show visible pitting and fin deterioration within five years. Coated coils, often called coastal or corrosion-resistant coils, add cost upfront but routinely outlast standard coils by a wide margin in salt air. We’ll give you honest numbers for both options and let you decide. No pressure.
A corroded contactor on the outdoor condenser that causes voltage spikes and eventually kills the blower motor relay inside. We serviced a 1980s rancher in the Village of North Palm Beach where a corroded contactor had been chattering and eventually killed the blower motor relay. Our tech replaced the contactor, cleaned the pitted condenser coil, and verified the refrigerant charge before confirming the heat exchanger was still sound and the furnace was safe to run. That sequence is common enough that we check for it first on every call.
What to Do Before a Cold Snap in North Palm Beach
Salt air from the Intracoastal and Atlantic shortens furnace and heat pump life in North Palm Beach, and the time to act is before a cold snap, not during one. Here’s what we recommend:
- Have the outdoor electrical connections inspected and treated. This is the #1 preventive step for homes east of US-1 and along the C-17 Canal.
- Check the condenser coil for pitting. If fins look white and chalky, airflow is already reduced and the system is working harder than it should.
- Test the furnace now, not when temperatures drop. Run it for 15 minutes. Listen for relay chatter or delayed ignition. If anything sounds off, call us before the cold front arrives.
- Know who’s coming to your door. Every Brandt HVAC technician is background-checked, identity-verified under the Threshold Verified standard, and sent to you by name and photo before the visit. If anyone arrives who you were not told to expect, that visit is on us and we make it right.
Call Brandt HVAC Co West Palm Beach for Furnace Repair in North Palm Beach
Furnace trouble in North Palm Beach is rarely just a furnace problem. It’s salt air, coastal humidity, and electrical connections that corrode years before they should. That’s the work we do every day. You’ll get a written price before anything starts, a written guarantee on every repair, and a technician you know by name before the doorbell rings. If the repair fails within the guarantee period, the 365-Day Done Right Promise means we return free. Call (728) 220-0996 now and speak to a live person, 24 hours a day, seven days a week.
Written by Devin Marlowe, Owner at Brandt HVAC Co West Palm Beach, serving North Palm Beach and surrounding communities.