Rheem Furnace Repair Nationwide

Rheem Furnace Repair in West Palm Beach: What to Know First

We repair Rheem furnaces across West Palm Beach, and most jobs are completed the same day we diagnose them. Expect to pay between $150 and $700 for a typical Rheem furnace repair, parts and labor included, with a written price before any work begins. As an independent Rheem service provider, we’re not affiliated with the manufacturer, but our techs know these systems inside and out.

Call (728) 220-0996

This page is for homeowners in West Palm Beach who own a Rheem furnace and want straight answers about what’s wrong, what it costs, and who’s walking through the door. Call (728) 220-0996 and a live person answers, 24/7.

How Rheem Products Fail – and How We Fix Them

Rheem builds solid equipment, but every brand has its patterns. Here are the failures we see most often on Rheem furnaces in West Palm Beach homes, and what we do about them.

• Ignitor failure on Rheem Classic and Classic Plus series (90 and 95 AFUE models). The silicon nitride ignitor in these units is reliable, but after 7-10 years it develops micro-cracks that cause intermittent ignition. You’ll hear the gas valve click, the furnace will try to light, and then nothing. We replace with an OEM Rheem ignitor because the aftermarket versions don’t always seat correctly in the burner assembly. Typical cost: $180-$320.
• Pressure switch nuisance trips on Rheem Prestige series (R96V and R97V modulating models). West Palm Beach’s humidity plus the way these high-efficiency units condense moisture means the pressure switch tubing gets partially blocked with condensation or debris. The furnace will fire for a few minutes, then shut down with a pressure switch error code. We clear the line, verify the switch calibration, and if the switch itself is failing, we replace it with the OEM part. Typical cost: $150-$250.
• Draft inducer motor bearing wear on Rheem Classic 80 and Classic 90 models. This is the small motor that pulls combustion gases through the heat exchanger and vents them outside. When the bearings start to go, you’ll hear a grinding or squealing noise before the furnace fires. Left alone, the motor seizes and the furnace won’t run at all. We replace the full inducer assembly, not just the motor, because the fan wheel and housing wear together on Rheem units. Typical cost: $350-$550.
• Flame sensor carbon buildup on virtually every Rheem model we service. The flame sensor tells the control board that the burners actually lit. In West Palm Beach, where furnaces sit idle for long stretches, the sensor picks up a layer of oxidation and carbon that blocks the microamp signal. The furnace lights, runs for three seconds, then shuts off. This is typically a cleaning fix, not a replacement, and it’s one of the least expensive repairs we do. Typical cost: $150-$200.
• Heat exchanger stress cracks on Rheem Classic Plus 90+ models older than 15 years. This is the one repair where we’ll tell you to think carefully. Rheem uses a tubular heat exchanger that’s generally tough, but years of thermal cycling in a humid climate eventually take a toll. If we find a crack, we’ll show you photos and give you the repair cost versus replacement math without pushing you either way. Your safety comes first, and we’ll never tell you to run a furnace with a compromised heat exchanger. Repair cost: $400-$700 if the heat exchanger is still under warranty; replacement starts around $3,500.

Our Rheem Furnace Repair Process

Here’s how a Rheem repair job goes with us, from your first call to the final test.

1. 1
   You call (728) 220-0996. A live person answers, day or night. You tell us what the furnace is doing, and we schedule a window that works for you. Before the tech arrives, you get their name and photo by text or email.
2. 2
   Diagnosis and written price. The tech shows up in uniform, badge visible, and you’ll recognize them from the photo we sent. They run the full diagnostic on your Rheem unit, show you what’s wrong in plain language, and write down a firm price before any work starts. No exceptions.
3. 3
   Parts decision. For Rheem repairs, we default to OEM parts when they matter for fit and longevity, like ignitors and pressure switches. We’ll use a quality aftermarket part when it’s genuinely equal or better, and we’ll tell you which route we’re taking and why.
4. 4
   The repair. The tech performs the work, tests the component, and then runs the furnace through a full cycle to confirm it lights, heats, and shuts down correctly.
5. 5
   Written guarantee and cleanup. You get a written guarantee on the repair, a summary of what was done, and a clean work area. The guarantee lasts 365 days under our Done Right Promise. If the same repair fails within that year, we come back free. No argument.

What Rheem Furnace Repair Costs in West Palm Beach

Most Rheem furnace repairs in West Palm Beach fall between $150 and $700. Here’s the breakdown by common job:

• Flame sensor cleaning: $150-$200
• Ignitor replacement: $180-$320
• Pressure switch replacement: $150-$250
• Draft inducer motor assembly: $350-$550
• Gas valve replacement: $250-$450
• Blower motor replacement: $300-$600
• Heat exchanger repair: $400-$700 (or more, depending on warranty status)

What moves the price? Age of the unit, parts availability (some older Rheem parts take an extra day to source), and whether the problem is isolated or has caused downstream wear. You’ll always know the exact number before we turn a wrench. Call (728) 220-0996 for a free estimate on your Rheem furnace repair.

Why West Palm Beach Homeowners Call Brandt HVAC Co West Palm Beach for Rheem Work

We’ve been at this since 2003, and the way we do business hasn’t changed: a written price before any work starts, a written guarantee on every repair, and a live person on the phone 24 hours a day. If a repair fails within 365 days, we return at no charge. That’s the Done Right Promise, and it’s in writing, not fine print.

We’re Rheem specialists, but we also service Carrier, Trane, Lennox, Goodman, York, Daikin, Bryant, and American Standard. That breadth matters because most West Palm Beach homes eventually have mixed systems. Devin Marlowe, our owner, trained hands-on at Los Angeles Trade-Technical College and has been working on HVAC for over two decades. He’ll tell you what the furnace needs and what it doesn’t. Tell me what it’s doing, and I’ll tell you what it needs – no guesswork, no runaround.

FAQs